This sustainable oak flooring is available in both engineered and solid oak. On display in Monmouth and Cheltenham Showrooms.
Distressed Finish: This treatment gives a lovely, worn, welcome look. The boards are distressed along the edges by hand, then marked on the face of the boards with chains and nails to make it look as if the oak has been there for a long time. At one time this was done by driving motorbikes over the floor dragging chains - think health and safety put a stop to this! It is simply the best example of Distressed Oak around. Old Duke is a warm, rich oil finish that gives the oak a lived in feel and is very easy to maintain. The first coat applied in-house by experienced ATC Finishers. Engineered wood is perfect for underfloor heating.
The Distressed Old Duke, as displayed in the main photograph on the right was fitted by ATC Floors and Doors. Please note that Old Duke is available in Character and Smooth grades: Boards or blocks
Specification: Distressed Oak is available in a good range of widths - you can have a regular (all the same widths) or a random (mixed widths) floor. Available in 140, 180, 220, 260 and 300mm. All 18mm thickness: 6mm top-layer of oak on 12mm of Birch plywood and good lengths. Tongue and grooved all four sides and kiln dried - with a guaranteed moisture content of 9-11% to suit all homes. Can be glued, fitted onto battens or floated.
Finishing: If ATC fitting we would deliver with the first coat on, fit the floor and then ideally apply the final coat of clear oil which gives a perfect finish. If you have your own Fitter we can either supply the oak with the first coat on and the oil for you to apply after the fitting. ATC can advise on aftercare and maintenance - all products available from Showrooms or ATC Online Shop
Distressed Herringbone Block oak flooring - quite an entrance. this is the perfect floor for a Hall, Snug or Games Room
In fact this customer liked this look so much they have wide engineered distressed oak boards fitted in their Living Room, downstairs and upstairs bathrooms. Then decided to have the blocks in their entrance hall and Sitting Rooms all fitted and hand oiled insitu by ATC Carpenters - not all at once, they just kept asking us back